Service of the Infiniti QX4 since 1996 of release
	1. Introduction
	2. Maintenance instruction
	3. Routine maintenance
	4. Engine
	5. Cooling system and heating
	6. Feed and control systems
	7. Systems of start and charge
	8. Transmission line
	9. Brake system
	10. Suspension bracket and steering
		10.1. Specifications
		10.2. Assessment of the general condition of components of a suspension bracket and steering of the car
		10.3. Check of a state and replacement of spherical support of a forward suspension bracket
		10.4. Check of a condition of steering drafts
		10.5. Removal and installation of the cross lever of a forward suspension bracket
		10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
		10.7. Removal, check of a state and installation of screw springs and rack-mount assemblies of a forward suspension bracket
		10.8. Removal and installation of stupichny assembly and rotary fist
		10.9. Removal, check of a state and installation of the forward stabilizer of cross stability
		10:10. Replacement of stupichny bearings
		10:11. Check of a condition of shock-absorbers and springs of a back suspension bracket
		10:12. Removal and installation of components and assembly of a back suspension bracket
		10:13. Removal, check of a state and installation of levers of a back suspension bracket
		10:14. Removal, check of a state and installation of screw springs of a back suspension bracket
		10:15. Removal and installation of shock-absorbers of a back suspension bracket
		10:16. Removal and installation of the back stabilizer of cross stability
		10:17. Removal, check of a state and installation of a cross jet bar of a back suspension bracket
		10:18. Pumping of a hydraulic path of the steering drive
		10:19. Checks and adjustments of a steering wheel
		10:20. Check of effort of resistance to sliding of a lath of the steering mechanism
		10:21. Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism
		10:22. Check of hydraulic pressure of GUR
		10:23. Adjustment of effort of a tension of a belt of the drive of the steering pump
		10:24. Removal and installation of reduktorny assembly
		10:25. Removal and installation of assembly of the steering mechanism
		10:26. Removal and installation of the steering pump
		10:27. Removal and installation of a steering wheel
		10:28. Removal and installation of assembly of the combined understeering switches
		10:29. Removal and installation of the lock of ignition / blocking of a steering column
		10:30. Removal, check of a state and installation of a steering column
		10:31. Angles of installation of forward wheels
	11. Body
	12. Electric equipment

10-26-snyatie-i-ustanovka-rulevogo-nasosa.html

10:26. Removal and installation of the steering pump

Design of the steering pump


1 — the Pulley 2 — the Lock ring 3 — the Leading shaft 4 — the Epiploon 5 — the Soaking-up tube 6 — the Sealing ring 7 — Pruzhina 8 — the Valve of management of a stream 9 — the Sealing ring 10 — the Socket 11 — the Copper washer 12 — the Hose 13 — the Bolt 14 — the Arm 15 — the Forward casing	16 — the Sealing ring 17 — the Sealing ring 18 — the Forward plate 19 — Shibera 20 — the Rotor 21 — the Pin 22 — the Cam ring 23 — Sealing laying 24 — the Back cover 25 — the Back arm 26 — the Basic arm 27 — the Adjusting level 28 — the Lock nut of an adjusting bolt 29 — the Adjusting bolt 30 — the Arm of an adjusting bolt

Performance of recovery repair of the steering pump will be reasonable to charge to specialists of car service.

Removal

PERFORMANCE ORDER

If you are going to remove a driving pulley, weaken a nut of its fastening.
Release adjusting bolts and take off a driving belt.
Disconnect a pressure head hose from the pump — try the adjusting angle of connection of a hose.
Remove the soaking-up line.
Turn out fixing bolts and remove pump assembly.

Installation

PERFORMANCE ORDER

Installation is made as it should be, the return to an order of dismantle of components. Remember that all sealing rings will lie down to replacement without fail. Before installation grease new rings of pure ATF. Track that all fixing bolts (including hollow bolts of nipple sockets) were tightened with the required effort.
In conclusion make adjustment of a tension of a driving belt (see Adjustment of effort of a tension of a belt of the drive of the steering pump).

"on the page back
10:25. Removal and installation of assembly of the steering mechanism

on the following page"
10:27. Removal and installation of a steering wheel