Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
8.1. 4-staged automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of the transfer case
8.2.3. Removal and installation of a driving electric motor of the actuation mechanism of the transfer case
8.2.4. Replacement of an oil filter of the transfer case
8.2.5. Replacement of epiploons of an output shaft of the transfer case
8.2.6. Replacement of an epiploon of a rod of switching of the transfer case
8.3. Differentials, power shafts / half shafts
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 












8-2-3-snyatie-i-ustanovka-privodnogo-ehlektromotora-ispolnitelnogo-ustrojjstva-razdatochnojj-korobki.html

8.2.3. Removal and installation of a driving electric motor of the actuation mechanism of the transfer case

 PERFORMANCE ORDER

  1. Disconnect an electrical wiring from the transfer case.
  2. Disconnect a tube of a sapun from an electric motor of the actuation mechanism of the transfer case.
  1. Turn out fixing bolts and remove an electric motor.

The sealing ring is subject to replacement without fail.


Installation

 PERFORMANCE ORDER

  1. Grease a new sealing ring with technical vaseline or ATF is fresher.
  2. Put a ring and establish an electric motor on the regular place, having tracked correctness of combination of the directing ledges.
  3. Tighten fixing bolts with the required effort (41 — 48 Nanometer).
  4. Connect a tube of a sapun to the motor.
  5. Restore initial connection of an electrical wiring.


"on the page back
8.2.2. Removal and installation of the transfer case
on the following page"
8.2.4. Replacement of an oil filter of the transfer case