Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
8.1. 4-staged automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of the transfer case
8.2.3. Removal and installation of a driving electric motor of the actuation mechanism of the transfer case
8.2.4. Replacement of an oil filter of the transfer case
8.2.5. Replacement of epiploons of an output shaft of the transfer case
8.2.6. Replacement of an epiploon of a rod of switching of the transfer case
8.3. Differentials, power shafts / half shafts
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 












8-2-6-zamena-salnika-shtoka-pereklyucheniya-razdatochnojj-korobki.html

8.2.6. Replacement of an epiploon of a rod of switching of the transfer case

 PERFORMANCE ORDER

  1. Remove the forward driveshaft.
  2. Remove a connecting flange (see Replacement of an epiploon of lengthening of transmission).
  1. Disconnect a control lever from the executive lever of the drive of switching, then remove the executive lever.
  1. Having hooked the suitable screw-driver, remove a switching rod epiploon.
  1. Previously having greased sealing sponges with universal lubricant, fill a new epiploon in a landing nest and press it by means of a cylindrical mandrel as which it is possible to use the replaceable face head suitable by the size or a piece of a pipe of the corresponding diameter. The edge of a mandrel has to rest only against a rigid face surface of an epiploon.
  1. Further installation is made as it should be, the return to an order of dismantle of components.


"on the page back
8.2.5. Replacement of epiploons of an output shaft of the transfer case
on the following page"
8.3. Differentials, power shafts / half shafts