Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
8.1. 4-staged automatic transmission
8.2. Transfer case
8.3. Differentials, power shafts / half shafts
8.3.1. General information and check of a condition of components
8.3.2. Removal and installation of differentials
8.3.3. Replacement of sealing laying of forward differential
8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential
8.3.5. Removal, service and installation of the oil pump
8.3.6. Removal and installation of back half shafts
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 







8-3-4-snyatie-i-ustanovka-soedinitelnogo-flanca-i-zamena-salnika-zadnego-differenciala.html

8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential

 PERFORMANCE ORDER

  1. Remove the driveshaft (see Removal and installation of driveshafts).
  2. By means of a special key (J34311) give a nut of the leading gear wheel.
  3. By means of a suitable stripper remove a connecting flange.
  4. Having hooked, take an epiploon from a landing nest.
  5. By means of a cylindrical mandrel (KV38102510) put a new epiploon.

As a mandrel the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach.

  1. Further installation is made as it should be, the return to an order of dismantle of components, - track that all fixture was tightened with the required effort.

"on the page back
8.3.3. Replacement of sealing laying of forward differential		 on the following page"
8.3.5. Removal, service and installation of the oil pump