|
4-11-zamena-zadnego-salnika-kolenchatogo-vala.html
4.11. Replacement of a back epiploon of a bent shaft
Removal and installation of a back epiploon of a bent shaft
|
|
- Remove transmission and a driving disk (see the Head the Transmission line).
- Having hooked, the suitable tool, take an epiploon from the landing nest in the holder — try not to damage sealing walls of a nest and a pin of a bent shaft.
- Before installation oil sponges of a new epiploon pure motive.
- Fill an epiploon in the landing nest and by means of a suitable mandrel press it aflush with an external surface of the holder.
|
|
As a mandrel the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter can be used — the mandrel has to rest only against a rigid face surface of an epiploon! |
- Installation of other components is made as it should be, the return to an order of their dismantle — track that all fixture was tightened with the required effort.
|
|
|
|