Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and steering of the car
10.3. Check of a state and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a state and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a state and installation of the forward stabilizer of cross stability
10:10. Replacement of stupichny bearings
10:11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10:12. Removal and installation of components and assembly of a back suspension bracket
10:13. Removal, check of a state and installation of levers of a back suspension bracket
10:14. Removal, check of a state and installation of screw springs of a back suspension bracket
10:15. Removal and installation of shock-absorbers of a back suspension bracket
10:16. Removal and installation of the back stabilizer of cross stability
10:17. Removal, check of a state and installation of a cross jet bar of a back suspension bracket
10:18. Pumping of a hydraulic path of the steering drive
10:19. Checks and adjustments of a steering wheel
10:20. Check of effort of resistance to sliding of a lath of the steering mechanism
10:21. Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism
10:22. Check of hydraulic pressure of GUR
10:23. Adjustment of effort of a tension of a belt of the drive of the steering pump
10:24. Removal and installation of reduktorny assembly
10:25. Removal and installation of assembly of the steering mechanism
10:26. Removal and installation of the steering pump
10:27. Removal and installation of a steering wheel
10:28. Removal and installation of assembly of the combined understeering switches
10:29. Removal and installation of the lock of ignition / blocking of a steering column
10:30. Removal, check of a state and installation of a steering column
10:31. Angles of installation of forward wheels
11. Body
12. Electric equipment
 







10-28-snyatie-i-ustanovka-sborki-kombinirovannykh-podrulevykh-pereklyuchatelejj.html

10:28. Removal and installation of assembly of the combined understeering switches

Replacement of understeering switches can be made in an individual order without removal of assembly of the basis from a steering column.


 PERFORMANCE ORDER

  1. Deactivate SRS (see the Head Elektrooborudovaniye).
  2. Remove a steering wheel (see Removal and installation of a steering wheel).
  3. Disconnect an electrical wiring from assembly of the spiral cable reel and turn out bolts of fastening of the last to the basis of the combined understeering switches.
  4. Remove the cable reel.
  5. Disconnect an electrical wiring from the combined understeering switches.
  1. Turn out screws of fastening of the basis of assembly of understeering switches.

If there is a need for removal any one of switches, turn out screws of its fastening to the basis.

  1. Installation is made upside-down.

"on the page back
10:27. Removal and installation of a steering wheel		 on the following page"
10:29. Removal and installation of the lock of ignition / blocking of a steering column